UniPURE

The UniPURE product lines of purification catalyst are specifically designed for the removal of sulfur, chloride, mercury, arsine, oxygen, and other impurities. UNICAT's broad product line and mixed bed design technology has the flexibility to provide optimal purification performance at the best value based on the severity of service and operating conditions, which includes trace removal for ultra‐purification applications. With over 60 different products manufactured in its ISO 9002 production centers, Unicat’s broad product line has provided its over 200 clients exceptional value with its quality, pricing and service. UNICAT provides the full design system from beginning to end saving you time and most importantly money.

Sulfur Removal [SulfuCAT]

The SulfuCAT catalysts is uniquely designed for a variety of desulfurization methods to meet your needs.

SR-101C

A specialty Fe2O3-based H2S removal product used for the desulphurization of natural gas, off-gas, air, or landfill gas.

SR-105

A specialty mixed metal based ( iron carrier) H2S removal products used for the desulfurization of Air, stack gases, natural gas, off-gas, landfill gas, and other emission sources especially with high levels of H2S.

SR-109

SR-109 is our standard zinc oxide product to be used in desulfurization of natural gas, light naphtha, off-gas, and light hydrocarbons at an operating temperature range of >400 F.

SR-110

SR-110 is a high surface area ZnO catalyst for removal of H2S and light mercaptens in applications that have design limitations due to high GSV ( Gas Space Velocity) and or require higher surface are due to lower thermodynamic conditions.

SR-110C

SR-110C is a high porosity and higher surface area ZnO catalyst for removal of H2S and COS in lower to medium temperature applications.

SR-111

UNCAT SR-111 is a high density and high purity version zinc oxide product to be used in desulfurization of natural gas, light naphtha, off-gas, and light hydrocarbons at an operating temperature range of 600 F to 750 F.

SR-115CR

A reduced state MnO based product for desulphurization application where removal of H2S is required at high temperatures and traditional ZnO does not work.

SR-116R

A MnO based product for desulphurization application where removal of H2S, RSH and COS is required.

TSR-121

A new UNICAT proprietary low temperature desulphurization catalyst which uses CuCO3 & ZnCO3 technology for maximum H2S absorption in ambient conditions.

TSR-12

A high surface area CuO on carbon re-generable chemistry catalyst to allow for bulk removal of sulfur species from natural gas or refinery gases.

TSR-120

TSR-120 is a new UNICAT Proprietary low temperature desulphurization catalyst which uses CuCO3 and ZnCO3 technology for maximum H2S absorption in ambient conditions from CO2 rich gas streams.

TSR-123

A high activity, maximum absorption capacity CuO/ZnO based sulfur removal catalyst for use in LNG, CO2 , natural gas, light hydrocarbon streams both liquid or vapor phase up to naphtha.

NSR-116R

NSR-116R is a Ni based catalyst used for sulfur from hydrocarbon streams of all types where there is a need for severe and maximum sulfur removal.

NSR-116RX

NSR-116RX is the advanced form of the NSR-116R standard type sulfur guard catalyst. It exhibits a higher sulfur than the NSR-116R.

Chloride Removal [ChloroCAT]

ChloroCAT is a series uniquely designed by Unicat to fit any type of dechlorinization you need.

CLX-13

A zeolite based organic and inorganic chloride guard catalyst designed for use in applications where a high surface area moderate capacity product is required without the acidity based carrier side effects regularly associated with activated alumina type absorbents.

CLX-16

Zeolite based chloride guard is an absorbent designed for use in applications where a high surface area higher capacity product is required without the acidity based carrier side effects regularly associated with activated alumina type absorbents.

CLX-19

A promoted zeolite based chloride guard catalyst primarily used to remove organic chloride in applications where there is an equal amount of inorganic and organic chlorides in the feed.

CR-10X

A causticized activated alumina high performance, high porosity, high surfaced area product used for the dechlorination of natural gas, naphtha, off-gas, and light liquid hydrocarbons.

CR-20

A highly causticized high performance activated alumina chloride removal catalyst used for the dechlorination of natural gas, naphtha, off-gas, and light liquid hydrocarbons used in production of syn-gas such as ammonia and hydrogen.

CR-55

A high performance zinc oxide-calcium oxide product used for the dechlorination of natural gas, naphtha, off-gas, and light liquid hydrocarbons.

TCR12

A Cl removal catalyst used for the removal of light organic chloride compounds at the outlet of typical chloride removal reactors.

TCR14

A Chloride Removal catalyst used for the removal of organic chloride compounds at the outlet of typical chloride removal reactors.

TCR16

A dechlorination catalyst used for the removal of heavy organic chloride compounds at the outlet of typical chloride removal reactors.

Mercury Removal [MercuCAT]

MeruCAT is Unicat's unique Mercury removal line designed to fit your every need.

MR-13

A specialty impregnated, coal-based activated carbon that is specifically designed for the removal of Mercury (Hg) which is difficult to remove by other adsorbents including standard activated carbon.

MR-15

A new UNICAT proprietary low temperature catalyst which uses sulfided activated alumina for Hg absorption in ambient conditions from light liquid hydrocarbon streams ( Butane , Propane, LPG etc) applications.

MR-17

A new UNICAT proprietary low temperature catalyst which uses sulfided activated alumina for Hg absorption in ambient conditions from light liquid hydrocarbon streams ( Butane , Propane, LPG etc) applications.

MR-19

A new UNICAT proprietary low temperature catalyst which uses a specialty blend of metal oxides and metal sulfides with alumina carrier for Hg absorption in ambient conditions from gas to liquid hydrocarbon streams applications where removal of trace Hg and possibly other metals such as As, Hg, V, and Fe are also intended.

MR-21

A new UNICAT proprietary low temperature catalyst which uses a specialty blend of reduced metal sulfides with binder for Hg absorption in ambient conditions.

Arsine Removal [ArsiCAT]

The ArsiCAT line is used for arsin removal in a variety of fashions to meet your needs.

AR-201

A high activity maximum absorption capacity lead based arsine and trace sulfur removal catalyst for use in propylene, propane, ethane, and light hydrocarbon streams. Specification Sheet Request MSDS Request

AR-202HC

A high activity maximum absorption capacity CuO/ZnO-based arsine and trace sulfur removal catalyst for use in LNG, CO2, natural gas, ethylene, propylene, propane, ethane, and light hydrocarbon streams. Specification Sheet Request MSDS Request

AR-205E

A high activity maximum absorption capacity CuO/MnO-based arsine removal catalyst for use in natural gas, and light vapor phased hydrocarbon streams. Specification Sheet Request MSDS Request

Oxygen Removal [OxiCAT]

The OxiCat line is uniquely designed for mainly Oxygen removal purposes. There are other products in this line that are used for removal of other undesired gasses such as CO2 and H2S.

OR-400

OR-400 is a fixed bed CuO/ZnO based catalyst for removal of trace levels of reducing gases and oxygen from hydrocarbon streams ( liquid or gas) such as propylene, ethylene, and other olefin streams or inert gases. Specification Sheet Request MSDS Request

OR-35

UNICAT OR-35 series represent a wide array of products to be used for removal of a broad range of oxygen levels from petroleum hydrocarbon gases, inert industrial gases such as Argon, Helium, Nitrogen, and hydrogen. Specification Sheet Request MSDS Request

OR-50C

OR-50C is a fixed bed CuO based catalyst for removal of 1-50 ppm levels of O2 from process gas or olefinic streams. Specification Sheet Request MSDS Request

HR-47

HR-47 is a bi-metal Pt/Pd based H2 removal catalyst for use in CO2 reach streams used as feedstock for Urea plants. Specification Sheet Request MSDS Request

HR-49

HR-49 is a Pt based H2 removal catalyst for use in CO2 reach streams used as feedstock for Urea plants with higher thermal stability and higher activity. Specification Sheet Request MSDS Request