Methanol Production

Purification

SR-109

SR-109 is our standard zinc oxide product to be used in desulfurization of natural gas, light naphtha, off-gas, and light hydrocarbons at an operating temperature range of >400 F.

SR-110

SR-110 is a high surface area ZnO catalyst for removal of H2S and light mercaptens in applications that have design limitations due to high GSV ( Gas Space Velocity) and or require higher surface are due to lower thermodynamic conditions.

SR-110C

SR-110C is a high porosity and higher surface area ZnO catalyst for removal of H2S and COS in lower to medium temperature applications.

SR-111

UNCAT SR-111 is a high density and high purity version zinc oxide product to be used in desulfurization of natural gas, light naphtha, off-gas, and light hydrocarbons at an operating temperature range of 600 F to 750 F.

TSR-117G

TSR-117 is a high activity, maximum absorption capacity CuO/ZnO based sulfur removal catalyst for use in LNG, CO2 , natural gas, light hydrocarbon streams both liquid or vapor phase up to naphtha.

CR-20

CR-20 is a highly causticized high performance activated alumina chloride removal catalyst to be used in the dechlorination of natural gas, naphtha, off-gas, and light liquid hydrocarbons used in production of syn-gas such as ammonia and hydrogen.

CR-55

CR-55 is a high performance zinc oxide-calcium oxide product to be used in the dechlorination of natural gas, naphtha, off-gas, and light liquid hydrocarbons. Its operating range is ambient to 400 F.

Hydro-Desulfurization

HT-75

HT-75 is a standard CoMo hydrotreating catalyst for hydrodesulfurization of natural gas, off-gas, heavy gas, light liquid hydrocarbon services with 1-200 ppm sulfur range.

HT-76

HT-76 is a NiMO based hydrotreating, HDS, and nitrogen removal catalyst for use as full bed loading for gas, heavy gas, town gas, LPG, up to straight run naphtha, or cracked Naphtha.

HT-75HSA

HT-75HSA is used by UNICAT as a technical answer for HDS application in Ammonia, Methanol and or Syn Gas applications where the Gas Space velocity across the HDS reactor are very high (>5000 1/hour) and where there is a need for COS conversion.

HT-85R

HT-85R is a standard ring shaped CoMo hydro treating catalyst for bed grading requirements in modern hydrotreators of all applications and as a low pressure drop alternative in Syn Gas applications in lieu of HT-75 series.

HT-86R

HT-86R is an active NiMo promoted active ring shaped catalyst for bed grading applications in all refining Hydroprocessing reactors.

Reforming

NG-610-6H

Unicat’s NG-610-6H is a nickel based catalyst with an alpha alumina carrier for primary steam reforming units in hydrogen, ammonia, SynGas and methanol plants.

NG-611-6H

NG–611-6H series catalysts are Ni-based catalysts for primary reformers for operation in low S/C, high CO2 recycle, or heavy HC feed-stocks.

NG-612-6H

NG–612-6H are a line of slightly potash promoted Ni based steam reforming catalyst with the added benefit of an alkali based carrier for top layer loading in primary reformers with Natural Gas feedstocks with higher wt% of C2-C6.

NG-615-6H

NG–615-6H is a potash promoted Ni based steam reforming catalyst with the added benefit of an alkali based carrier for top layer loading in primary reformers in operation in with heavy hydrocarbon feed stocks such as LPG/Propane/Butane.

NG-615-4K

NG–615-4K is a specialty formulated highly alkalized carrier Ni based steam reforming catalyst for top layer loading in primary reformers in operation with naphtha feed stock.

NGPR-1

NGPR-1 is a standard high activity pre-reformer with Mg Aluminate carrier and > 25% Ni content. It is designed only for Heavy NG applications and is active as low as 800 F (>430 C) for reforming reactions.

NPGR-2

NGPR-2 is a high activity pre-reformer catalyst that is based on high Ni content and is designed for medium to heavy HC service applications and is active as low as 740 F (385 C) for reforming reactions.

NG-600X

NGR– 600X series is a secondary reformer catalyst with exceptional high thermal resistance for use in the very top layer of secondary reformers in ammonia plants.

NG-600-6H

Unicat's NG-600-6H is anickel-based, 6-hole cylinder, secondary reforming catalyst with a cemented carrier. NG-600-6H has a very high temperature tolerance carrier matrix and shape-optimized, 6-hole cylinder with convex ends designed to balance strength, activity and pressure drop requirements for severe service requirements.

NG-605-6H

Unicat’s NG-605-6H is a nickel-based, 6-hole cylinder, secondary reforming catalyst with Alumina based carrier for use in the lower sections of the secondary reformer.

Methanol Synthesis

MS-900

MS-900 is the next generation UNICAT CuO/ZnO Low Temperature Active Methanol Synthesis catalyst product to be used in the shifting of CO/H2 to MeOH in reformed natural gas or coal gasification based methanol plants. Its operating range is typically from 374 F to 562 F. It has an excellent low temperature activity, resistance to thermal sintering and methanol selectivity.

Dryers and Absorbents

Unimol 3A

This will soon have a description...

Unimol 5A

This will soon have a description...

WR-11

This will soon have a description...