UNICAT supplies specialty chemical catalysts for specific applications in

chemical plants and refineries.

ADC2: Ni/MgO based catalyst for ammonia decomposition.

AS-110/-110R: Magnetic particles for ammonia synthesis.

CCS-12: Activated alumina catalyst with high porosity and surface area for elemental Sulfur formation.

COR-40:Carbon monoxide removal (down to 0.3ppm) catalyst that can be regenerated.

DMT-1500: Dehydrogenation of low paraffin products. High selectivity to olefins and stability in water containing vapors.

FDR: Formaldehyde diluent rings with ceramic or alumina-based chemistry.

ISM-2: Impregnated Support Media; CoMo or NiMo on ceramic with high crush strength

MC-710: Ni-based methanation catalyst in oxidized form. High activity and surface area

MC-710R: Ni-based methanation catalyst in pre-reduced form. High activity and surface area

MC-750: Ni-based deep methanation catalyst in oxidized form. Highest activity and surface area.

MC-750R: Ni-based deep methanation catalyst in pre-reduced form. Highest activity and surface area.

MS-900: CuO/ZnO low temperature Methanol synthesis catalyst. Highly resistant to sintering at excessive temperatures.

OR-30: Deoxidation catalyst for H2 or O2 removal to < 1ppm.

0R-32: MnO-promoted deoxidation catalyst. Does not create secondary reactions.

OR-34: Deoxidation for industrial gas. Regenerable for 10 cycles. Does not form water

PDH-20: Acetylene Hydrogenation Pd catalyst for low temperature applications.

POLYCAT-1: Solid phosphoric acid catalyst for linear hydrocarbon polymerization.

RNC (Raney Nickel): Sponge Raney Nickel catalyst. Ni and promoters made to order.

SS-445: High activity, Low pressure system Sour Shift catalyst. Excellent crush strength, highly resistant to steam and/or water condensation.

SS-450: Standard Sour Shift catalyst with excellent crush strength.

SS-455: High activity, High pressure Sour Shift catalyst with excellent crush strength.

TG-79: High surface area, high porosity CoMo catalyst for tail gas sweetening process.

UNICARBON PSA: High density activated carbon with high porosity and superior hardness. High capacity for CO2 in H2 PSA applications.

WR-11: Dessicant water removal activated alumina for gas streams.

2003-2004.© Copyright protected. All rights reserved.